NATO Brown
NATO Brown-866- is a highly pigmented color from the 3D Model Color system – the first color system developed specifically for 3D printing.
A warm, deep, muted orange-brown – at home in family G · Military & Insignia, for military modelling, tabletop and RC.
Adheres directly to PLA, PETG, ABS and ASA – no primer needed. Opaque with the brush straight from the bottle; for airbrush, thin with Retarder – the finer the nozzle, the more: 10 percent at 0.4–0.5 mm, 20 percent at 0.2–0.3 mm, up to 30 percent against heavy tip-dry. Recoat after 10–15 minutes.
Part of the Full range (129 tones).
Family G · Military & Insignia · 30 ml dropper bottle
Application
Straight onto the print: no primer needed. Shake well before use, apply thin, recoat after 10–15 minutes. Brush straight from the bottle; for airbrush, thin with Retarder – 10 to 30 percent, the finer the nozzle, the more.
Technique
Water-based color system, highly pigmented and detail-friendly. Bonds to PLA, PETG, ABS and ASA. 30 ml dropper bottle with dosing tip.