3D Model Leveler
€4,95
Leveler – the layer-line equalizer: mixed into Primer, it visually fills the grooves of the print. The coarser the print nozzle, the higher the share – 15% at 0.4 mm, 25% at 0.6 mm, 35% at 0.8 mm. Apply with brush or squeegee; for spraying, add Retarder to the mix (10–30% – more Leveler, more Retarder).
Part of the 3D Model Color system · 30 ml bottle
Application
Straight onto the print: no primer needed. Shake well before use, apply thin, recoat after 10–15 minutes. Brush straight from the bottle; for airbrush, thin with Retarder – 10 to 30 percent, the finer the nozzle, the more.
Technique
Water-based color system, highly pigmented and detail-friendly. Bonds to PLA, PETG, ABS and ASA. 30 ml dropper bottle with dosing tip.